PIC16LF722A-I/SS
| Parameters | |
|---|---|
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF722A |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of PWM Channels | 2 |
PIC16LF722A-I/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. It is mounted using the way of Surface Mount. It is available in the Tube package. The device runs in PIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 25 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number PIC16LF722A. The terminals of this device are set to DUAL. In this case, there are 28 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. By using a 3.3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 28 pins are required to construct this device. 28 pins are on it in total. This component is a part of Microcontrollers. Memory size for the devices is 3.5kB, which can be used to store programs and data. It is highly efficient when it works at a frequency of 20MHz. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. In total, there are 3 timers and counters. It belongs to the PIC CPU family. Internal is the oscillator type it uses.
PIC16LF722A-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF722A-I/SS Applications
There are a lot of Microchip Technology PIC16LF722A-I/SS Microcontroller applications.
- Mice
- Microwave ovens
- Automatic control
- Copiers
- Vacuum cleaners
- Microwave ovens
- Glucose monitoring systems (for Type 1 Diabetes)
- Paper shredders
- Aerospace navigation systems
- Leakage current tester
