PIC16LF726-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 20MHz |
| Base Part Number | PIC16LF726 |
| Pin Count | 28 |
| Interface | I2C, SCI, SPI, SSP, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 112 kb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF726-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. It comes in a Tube package. There is a PIC as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. 25 I/Os can be found on it. A comparable component can be found by using the base part number PIC16LF726. The terminals of this device are located at DUAL. In this case, there are 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 16F. By using a 3.3V voltage supply, high efficiency is possible. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A number of 28 pins are used to construct it. According to Through Hole, it is mounted. 28 pins are on it in total. It falls under the category of Microcontrollers. Memory size for the devices is 14kB, which can be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. A total of 3 timers/counters have been set up. CPU family PIC comprises the part. It works with an oscillator type Internal.
PIC16LF726-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF726-I/SP Applications
There are a lot of Microchip Technology PIC16LF726-I/SP Microcontroller applications.
- Robotic prosthetic limbs
- Instrument control
- Hard drives
- Digital TVs
- Radio
- Broadband technology, video and voice processing
- Electromechanical control
- Playstation
- Electronic jamming systems
- Industrial robot
