PIC16LF747-I/P
| Parameters | |
|---|---|
| Base Part Number | PIC16LF747 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 4.2mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Access Time | 12 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 52.26mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
PIC16LF747-I/P Overview
A space-saving advantage is that it is included in the 40-DIP (0.600, 15.24mm) package. In this case, it is mounted using the method of Through Hole. It comes in the package?of a Tube. A PIC core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FLASH. A total of 36 I/Os are available on this device. To find equivalent components, use its PIC16LF747 base part number. DUAL is the position of its terminals on the board. It consists of 40 terminationals. In the PIC? 16F series, this electrical component is found. By using a 5V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 40 pins are used to construct it. During the mounting process, the device is mounted based on the Through Hole method. On it, there are 40 pins. In Microcontrollers, this component is included. The devices have a maximum memory size of 7kB that can be used to store programs and data. It should be noted that 4.2mA represents the maximum supply current. Power is provided by a 2/5.5V source. It performs extremely well at a frequency of 10MHz. 3 timer/counters are present. The part is a part of the PIC CPU family. It has the property of OPERATES AT 2V MINIMUM SUPPLY @ 4 MHZ as well. In order to maintain normal operation, Vsup must be above 3V. Using oscillator type Internal makes it work.
PIC16LF747-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF747-I/P Applications
There are a lot of Microchip Technology PIC16LF747-I/P Microcontroller applications.
- Walkie talkies
- Robotic prosthetic limbs
- Toasters
- Robots
- Fabric
- Volt meter
- Keyboards
- Leakage current tester
- Petrochemical
- Digital cameras
