PIC16LF76-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF76 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| Nominal Supply Current | 400μA |
| Speed | 10 MHz |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 112 kb |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of ADC Channels | 5 |
| Number of PWM Channels | 2 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF76-I/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. Package Tube contains it. The device runs in PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. A total of 22 I/Os are present. A comparable component can be found by using the base part number PIC16LF76. This device has terminals at DUAL. As far as terminations are concerned, there are 28 terminations present. An electrical component such as this is included in the series PIC? 16F. Because the supply voltage is 5V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 28 pins are used to construct it. The method of Surface Mount is used to mount it. There are a total of 28 pins on it. Microcontrollers contains this component. In the device, there is a memory capacity of 14kB which may be used to store programs and data. Using a frequency of 20MHz, it is very efficient. There are 3 timers/counters. It belongs to the PIC CPU family. In order to ensure normal operation, the supply voltage (Vsup) must remain above 3V. There is an oscillator type External used in this circuit.
PIC16LF76-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF76-I/SO Applications
There are a lot of Microchip Technology PIC16LF76-I/SO Microcontroller applications.
- DCS control intelligent sensor
- Heart rate monitors
- Christmas lights
- Industrial robot
- Leakage current tester
- Volt meter
- Nintendo
- Printers
- Radio
- Digital set-top boxes
