PIC16LF767-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | PIC16LF767 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 112kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 4.2mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 12 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF767-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. The way of Through Hole is used to mount it. There is a Tube package available for it. PIC core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 25 I/Os on it, which makes it a very simple device. Based on the PIC16LF767 base part number, it can be compared with other components. At DUAL, its terminals are located. 28 terminations are present in it. It is a member of the PIC? 16F series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. Based on the Through Hole method, it is mounted. It has a total of 28 pins on it. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 112kB. It is important to note that the maximum supply current is 4.2mA. There is 2/5.5V power source in this device. This device achieves excellent efficiency at frequencies of 10MHz. There are 3 timers/counters. The part is a part of the PIC CPU family. Moreover, it also has the property of OPERATES AT 2V MINIMUM SUPPLY @ 4 MHZ. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. Using a Internal oscillator type, it works well.
PIC16LF767-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF767-I/SP Applications
There are a lot of Microchip Technology PIC16LF767-I/SP Microcontroller applications.
- Ipod
- Toasters
- Mobile computers
- Speed meter
- Process control devices
- Accu-check
- Microwave ovens
- Fax machines
- Pacemakers (used to control abnormal heart rhythm)
- Electronic jamming systems
