PIC16LF77-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF77 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| Speed | 10 MHz |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 2mA |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
PIC16LF77-I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. The way of mounting it is Surface Mount. This item can be found in package Tray. A PIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. It has a number of 33I/Os. A comparable component can be found by using the base part number PIC16LF77. The terminals of this device are set to QUAD. It has 44 terminationals. This electrical component is part of the PIC? 16F series. Because the supply voltage is 5V, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. There are 44 pins on it. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 14kB. In this case, 2mA represents the maximum current supply. It is powered by a 2/5.5V?source. It is highly efficient when it works at a frequency of 20MHz. A total of 3 timers/counters have been set up. This part is part of the PIC family of CPUs. There is also the property of OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ. Vsup should be kept above 3V for normal operation. The oscillator type External is used to operate the device.
PIC16LF77-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF77-I/PT Applications
There are a lot of Microchip Technology PIC16LF77-I/PT Microcontroller applications.
- Telephone sets
- Binding machines
- Auto-breaking system
- Copiers
- DDC control
- PDAs, game consoles
- Walkie talkies
- Speed meter
- Home appliances
- Keyboards
