PIC16LF873A-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16LF873A |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, SSP, UART, USART |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 192 x 8 |
| Memory Type | EPROM, FLASH |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 1 |
| Density | 56 kb |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 5 |
| Number of PWM Channels | 2 |
| Height | 3.43mm |
| Length | 35.18mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF873A-I/SP Overview
A space-saving advantage is that it is included in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It comes in the package?of a Tube. A core processor of PIC is present in the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 22 I/Os are available on this device. A comparable component can be found by using the base part number PIC16LF873A. At DUAL, it has its terminals. There are a total of 28 terminations in it. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Because the supply voltage is 5V, high efficiency can be achieved. For data storage, EPROM, FLASH is used as its memory type. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is composed of 28 pins. According to Through Hole, it is mounted. In total, it has 28 pins. In the subcategory of Microcontrollers, this component is included. At a frequency of 20MHz, it can achieve excellent efficiency. There are 1 timers/counters. It is one of the members of the CPU family PIC. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. The oscillator type External is used to operate the device.
PIC16LF873A-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF873A-I/SP Applications
There are a lot of Microchip Technology PIC16LF873A-I/SP Microcontroller applications.
- Washing machines
- Industrial robot
- Xbox
- Fabric
- DCS control intelligent sensor
- Telephone sets
- Equipment control
- Embedded gateways
- Digital cameras
- Blood pressure monitors
