PIC16LF877A-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16LF877A |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 112 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 4.06mm |
| Length | 52.45mm |
| Width | 14.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF877A-I/P Overview
As a result, it is available in the 40-DIP (0.600, 15.24mm) package. This is mounted using the Through Hole method. Tube is the package that contains it. Devices with PIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. There are 33 I/Os on the board. It has a part number of PIC16LF877A that can be used to locate similar components. At DUAL, its terminals are located. This circuit consists of 40 terminationals. This electrical component is part of the PIC? 16F series. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 40 pins are used. According to Through Hole, it is mounted. There are a total of 40 pins on it. This component is a part of Microcontrollers. The devices have a memory size of 8kB that can be used to store programs and data. It performs extremely well at a frequency of 20MHz. 3 counters/timers are currently active. It is part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 3V. The oscillator type External is used to operate the device.
PIC16LF877A-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF877A-I/P Applications
There are a lot of Microchip Technology PIC16LF877A-I/P Microcontroller applications.
- Wastewater treatment
- Projector
- Teletext terminals
- Routers
- Switches
- Petrochemical
- Automatic staplers
- Digital TVs
- Mobile computers
- Auto-breaking system
