PIC16LF877A-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF877A |
| Pin Count | 44 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| Nominal Supply Current | 600μA |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 112 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF877A-I/PT Overview
For space savings, it is available in the 44-TQFP package. This is mounted using the Surface Mount method. This item can be found in package Tray. PIC core processor is present on the device. Work should be performed at a temperature of -40°C~85°C TA. There is FLASH program memory in it. 33 I/Os are present on the device. To find comparable components, use the PIC16LF877A base part number. QUAD is the position of its terminals on the board. 44 terminations are present in it. The PIC? 16F series includes this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. The structure is constructed from 44 pins. It is mounted based on the method of Surface Mount. There are a total of 44 pins on it. Microcontrollers contains this component. It is possible to store programs and data on the devices, as they have a memory size of 8kB. Working at a frequency of 20MHz results in excellent efficiency. A total of 3 timers/counters are present. This part is an integral part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 3V. External is the oscillator type it uses.
PIC16LF877A-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF877A-I/PT Applications
There are a lot of Microchip Technology PIC16LF877A-I/PT Microcontroller applications.
- Digital cameras
- Traditional industrial transformation
- Fax machines
- Smart instruments
- Multi-meter
- Oil and gas
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Kindle
- Fax machines
