PIC17C42A-25/L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | PIC® 17C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC17C42A |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Interface | SCI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 232 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.5V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 38mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 25 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC17C42A-25/L Overview
It is available in the 44-LCC (J-Lead) package for the benefit of saving space. A Surface Mount mounting method is used. This item can be found in package Tube. Devices with PIC core processors are available. Work should be done at 0°C~70°C TA. OTP has been assigned to it as a program memory. A total of 33 I/Os are available on this device. It has a base part number of PIC17C42A that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. It has 44 terminationals. This electrical component is part of the PIC? 17C series. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. A total of 44 pins are attached to it. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 4kB. In this case, 38mA represents the maximum current supply. A 5V source of power is being used to run it. Using a frequency of 25MHz, it is very efficient. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. 4 counters/timers are currently active. It belongs to the PIC CPU family. External is the oscillator type it uses.
PIC17C42A-25/L Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC17C42A-25/L Applications
There are a lot of Microchip Technology PIC17C42A-25/L Microcontroller applications.
- Laminators
- Auto-breaking system
- Telephone sets
- Nintendo
- Digital set-top boxes
- Copiers
- PDAs, game consoles
- Xbox
- Calculators
- Toasters
