PIC17C44-25/PQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | PIC® 17C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC17C44 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Interface | SCI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 454 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 4.5V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 38mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 25 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2.35mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC17C44-25/PQ Overview
There is an option to purchase it in the 44-QFP package, which saves space. Surface Mount is used for mounting. It comes in a Tray package. There is a PIC as core processor in this device. When working, the temperature should be kept at 0°C~70°C TA. The type of memory in which this program is stored is OTP. There are 33 I/Os on the board. A comparable component can be found by using the base part number PIC17C44. QUAD is the position of its terminals on the board. It has 44 terminationals. An electrical component such as this is included in the series PIC? 17C. Because the supply voltage is 5V, high efficiency can be achieved. In terms of data storage, EPROM is used as the memory type. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. There are 44 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. It has a total of 44 pins on it. It belongs to the subcategory Microcontrollers. In order to store data and programs, the devices have a memory size of 16kB. In this case, 38mA represents the maximum current supply. It is powered by a 5V?source. It is highly efficient when it works at a frequency of 25MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. 4 timer/counters are present. It is a member of the PIC family of CPUs. Using a External oscillator type, it works well.
PIC17C44-25/PQ Features
44-QFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC17C44-25/PQ Applications
There are a lot of Microchip Technology PIC17C44-25/PQ Microcontroller applications.
- Firewalls
- Switches
- Robotic prosthetic limbs
- Answering machines
- Toys
- Instrument control
- Fabric
- Tape drives
- Smart instruments
- Safety -airbags, automatic braking system (ABS)
