PIC18C452-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | PIC® 18C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18C452 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 50mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 34 |
| Length | 52.26mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18C452-E/P Overview
It is available in the 40-DIP (0.600, 15.24mm) package for the benefit of saving space. In this case, it is mounted using the method of Through Hole. This item can be found in package Tube. PIC core processor is present on the device. Maintain a temperature of -40°C~125°C TA while working. The type of memory in which this program is stored is OTP. There are 33 I/Os on it, which makes it a very simple device. A component with the same part number as PIC18C452 can be compared to other similar components. The terminals of this device are located at DUAL. It has 40 terminationals. The PIC? 18C series contains this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 40 pins are used in its construction. A total of 40 pins are attached to it. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 32kB which may be used to store programs and data. It is important to note that the maximum supply current is 50mA. A 5V power source powers it. It is highly efficient when it works at a frequency of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. 4 timers/counters are in use. This part is part of the PIC family of CPUs. A chip with 34 programmable inputs/outputs is available. The oscillator type External is used to operate the device.
PIC18C452-E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18C452-E/P Applications
There are a lot of Microchip Technology PIC18C452-E/P Microcontroller applications.
- Tape drives
- Radio
- Fax machines
- Telephone sets
- Safety -airbags, automatic braking system (ABS)
- Keyboards
- Printers
- Scanners
- Smartphones-calling, video calling, texting, email
- Process control devices
