Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
18-DIP (0.300, 7.62mm) |
Number of Pins |
18 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2003 |
Series |
PIC® 18F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
18 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Microcontrollers |
Max Power Dissipation |
1W |
Technology |
CMOS |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Frequency |
40MHz |
Base Part Number |
PIC18F1220 |
Pin Count |
18 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Interface |
UART, USART |
Memory Size |
4kB |
Oscillator Type |
Internal |
Number of I/O |
16 |
RAM Size |
256 x 8 |
Voltage - Supply (Vcc/Vdd) |
4.2V~5.5V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER |
Number of Bits |
8 |
Core Processor |
PIC |
Peripherals |
Brown-out Detect/Reset, LVD, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
8-Bit |
Program Memory Size |
4KB 2K x 16 |
Connectivity |
UART/USART |
Supply Current-Max |
15mA |
Bit Size |
8 |
Data Converter |
A/D 7x10b |
Watchdog Timer |
Yes |
Access Time |
40 μs |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
8b |
PWM Channels |
YES |
Number of Timers/Counters |
4 |
EEPROM Size |
256 x 8 |
On Chip Program ROM Width |
16 |
RAM (words) |
256 |
Number of ADC Channels |
7 |
On Chip Data RAM Width |
8 |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PIC18F1220-E/P Overview
For space savings, it is available in the 18-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. It comes in the package?of a Tube. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~125°C TA. FLASH is the type of program memory used by it. There are 16 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of PIC18F1220. The position of the device is DUAL at terminal. A 18 termination is contained within it. In the PIC? 18F series, this electrical component is found. The supply voltage of 5V allows for high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 18 pins are required to construct this device. A method of mounting is used, which is Through Hole. In total, it has 18 pins. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 4kB. Supply current cannot exceed 15mA. A 5V source of power is being used to run it. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. When 5V is employed, designers can fully utilize its adaptability and supply voltage. A total of 4 timers/counters have been set up. An oscillator type Internal is required for it to work.
PIC18F1220-E/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F1220-E/P Applications
There are a lot of Microchip Technology PIC18F1220-E/P Microcontroller applications.
- Dryers
- DVD\DV\MP3 players
- Digital TVs
- Nintendo
- Electronic jamming systems
- Gas monitoring systems
- Air fryers
- Food and beverage
- 3D printers
- Information appliances (networking of household appliances)