PIC18F1220T-I/SO
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1220 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| RAM (words) | 256 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
PIC18F1220T-I/SO Overview
To save space, it is included in the 18-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. You can find it in the package of Tape & Reel (TR). PIC core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. It has a number of 16I/Os. In order to find similar components, it has a base part number of PIC18F1220. DUAL is the position of its terminals on the board. Currently, it consists of 18 terminationals. An electrical component such as this is included in the series PIC? 18F. Because of the 5V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 18 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. This device has a total of 18 pins. This is a component included in Microcontrollers. Memory size for the devices is 4kB, which can be used to store programs and data. Supply current cannot exceed 15mA. A 5V source of power is being used to run it. It performs extremely well at a frequency of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. There are currently 4 timers/counters set up on the system. It works with an oscillator type Internal.
PIC18F1220T-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F1220T-I/SO Applications
There are a lot of Microchip Technology PIC18F1220T-I/SO Microcontroller applications.
- Dishwashers
- Broadband technology, video and voice processing
- Digital set-top boxes
- Routers
- Heater/Fan
- Smoke alarms
- Computer/laptop
- Traditional industrial transformation
- Process control devices
- Switches
