PIC18F1230-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1230 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F1230-I/SS Overview
For space savings, it is available in the 20-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. This item can be found in package Tube. Devices with PIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. A total of 16 I/Os are present. To find equivalent components, use its PIC18F1230 base part number. The terminals of this device are set to DUAL. It has 20 terminationals. It is a member of the PIC? 18F series of electrical components. Using the 5V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. There are 20 pins used in the construction of this device. It is mounted based on the method of Surface Mount. 20 pins are on it in total. Microcontrollers contains this component. In order to store data and programs, the devices have a memory size of 4kB. A maximum supply current of 40mA is set. A 5V source of power is being used to run it. This device achieves excellent efficiency at frequencies of 40MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. 2 counters/timers are currently active. As part of the PIC CPU family, this component is included. The oscillator type Internal is used to operate the device.
PIC18F1230-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F1230-I/SS Applications
There are a lot of Microchip Technology PIC18F1230-I/SS Microcontroller applications.
- Process control devices
- Projector
- Automatic control
- Fire alarms
- Toasters
- Switches
- Temperature sensing and controlling devices
- Oil and gas
- Tape drives
- DCS control intelligent sensor
