PIC18F1230T-I/SS
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1230 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Speed | 40 MHz |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Inputs | 2 |
| DAC Channels | NO |
| Sampling Rate | 250 ksps |
| Core Architecture | 8051 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
PIC18F1230T-I/SS Overview
To save space, it is included in the 20-SSOP (0.209, 5.30mm Width) package. Using Surface Mount, it is mounted. It is available in the Tape & Reel (TR) package. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. It has a number of 16I/Os. It has a part number of PIC18F1230 that can be used to locate similar components. The terminals of this device are set to DUAL. In this case, there are 20 terminationals. PIC? 18F is the series number of this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A number of 8 pins are used to construct it. A method of mounting is used, which is Surface Mount. It has a total of 20 pins on it. It is one of the components included in Microcontrollers. Using the devices' 4kB memory size, you can store programs and data. Its core architecture is 8051. In this case, 40mA represents the maximum current supply. Power is provided by a source of 5V. At a frequency of 20MHz, it exhibits excellent efficiency. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. This part is part of the PIC family of CPUs. An oscillator type Internal is required for it to work.
PIC18F1230T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F1230T-I/SS Applications
There are a lot of Microchip Technology PIC18F1230T-I/SS Microcontroller applications.
- Data acquisition and control
- Scanners
- Heart rate monitors
- Toys
- Multi-meter
- Teletext terminals
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Walkie talkies
- Dishwashers
- Answering machines
