PIC18F1320T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1320 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F1320T-I/ML Overview
As a result, it is available in the 28-VQFN Exposed Pad package. Mounted using Surface Mount. There is a Tape & Reel (TR) package available for it. A core processor of PIC is present in the device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 16 I/Os on the board. To find equivalent components, use its PIC18F1320 base part number. This device has terminals at QUAD. As far as terminations are concerned, there are 28 terminations present. The PIC? 18F series includes this electrical component. Using the 5V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. Based on the Surface Mount method, it is mounted. It is equipped with 28 pins in total. In the device, there is a memory capacity of 8kB which may be used to store programs and data. Using a frequency of 40MHz, it is very efficient. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. 4 timer/counters are present. Using an oscillator type of Internal, it works.
PIC18F1320T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
PIC18F1320T-I/ML Applications
There are a lot of Microchip Technology PIC18F1320T-I/ML Microcontroller applications.
- Temperature sensing and controlling devices
- Broadband technology, video and voice processing
- Ipad
- DCS control intelligent sensor
- Robotic prosthetic limbs
- Fax machines
- Switches
- Heart rate monitors
- DDC control
- Food and beverage
