PIC18F1320T-I/SS
| Parameters | |
|---|---|
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| Height Seated (Max) | 1.98mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1320 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
PIC18F1320T-I/SS Overview
As a result, it is available in the 20-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. This item can be found in package Tape & Reel (TR). Devices with PIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. It has a number of 16I/Os. Other components that are comparable to it have the base part number PIC18F1320. This device has terminals at DUAL. It has 20 terminationals. PIC? 18F is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 20 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. 20 pins are on it in total. Using the devices' 8kB memory size, you can store programs and data. Working at a frequency of 40MHz results in excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. 4 timer/counters are present. Internal is the oscillator type it uses.
PIC18F1320T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
PIC18F1320T-I/SS Applications
There are a lot of Microchip Technology PIC18F1320T-I/SS Microcontroller applications.
- 3D printers
- Process control devices
- Walkie talkies
- DVD\DV\MP3 players
- Petrochemical
- Fax machines
- Torpedo guidance
- Air fryers
- Process control devices
- Food and beverage
