PIC18F1330-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1330 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F1330-E/ML Overview
There is a 28-VQFN Exposed Pad package available to save space. The way of Surface Mount is used to mount it. You can find it in the package of Tube. Device with PIC core processor issupported. During work, the temperature should remain at -40°C~125°C TA. FLASH is its program memory type. It has a number of 16I/Os. A comparable component can be found by using the base part number PIC18F1330. At QUAD, it has its terminals. Currently, it consists of 28 terminationals. It is a member of the PIC? 18F series of electrical components. High efficiency is possible due to the 5V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A number of 28 pins are used to construct it. A method of mounting is used, which is Surface Mount. 28 pins are on it in total. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 8kB. It should be noted that 40mA represents the maximum supply current. There is 5V power source in this device. At a frequency of 25MHz, it exhibits excellent efficiency. The supply voltage of 5V's adaptability can be fully utilised by designers. There are currently 2 timers/counters set up on the system. PIC CPUs are included in this part. There is an oscillator type Internal used in this circuit.
PIC18F1330-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F1330-E/ML Applications
There are a lot of Microchip Technology PIC18F1330-E/ML Microcontroller applications.
- Graphic terminals
- Digital TVs
- Tape drives
- Mobile computers
- Guidance-GPS
- Virtual reality VR robots
- Multi-meter
- Fire detection & safety devices
- Binding machines
- Leakage current tester
