PIC18F1330-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F1330 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F1330-E/P Overview
As a result, it is available in the 18-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It is available in the Tube package. A core processor of PIC is present in the device. During work, the temperature should remain at -40°C~125°C TA. It has a type of program memory of FLASH. The device has 16 I/Os. It has a part number of PIC18F1330 that can be used to locate similar components. The terminals of this device are located at DUAL. It has 18 terminationals. The PIC? 18F series contains this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. There are 18 pins used in the construction of this device. According to Through Hole, it is mounted. It is equipped with 18 pins in total. It is one of the components included in Microcontrollers. In order to store data and programs, the devices have a memory size of 8kB. The maximum supply current is 40mA. It is powered by a 5V?source. At a frequency of 25MHz, it exhibits excellent efficiency. While deploying 5V, designers will be able to fully take advantage of its adaptability. The number of timers and counters is 2. This part is part of the PIC family of CPUs. Using an oscillator type of Internal, it works.
PIC18F1330-E/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F1330-E/P Applications
There are a lot of Microchip Technology PIC18F1330-E/P Microcontroller applications.
- ECG machine
- Glucose monitoring systems (for Type 1 Diabetes)
- Robotic prosthetic limbs
- Wastewater treatment
- Calculator
- Playstation
- Digital TVs
- Smart instruments
- Gas monitoring systems
- Fire detection & safety devices
