PIC18F1330T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1330 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F1330T-I/SS Overview
For the purpose of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. The way of mounting it is Surface Mount. In the package Tape & Reel (TR), it is included. A core processor of PIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. FLASH is its program memory type. There are 16 I/Os on it. It has a part number of PIC18F1330 that can be used to locate similar components. At DUAL, its terminals are located. Currently, it consists of 20 terminationals. In the PIC? 18F series, this electrical component is found. Using the 5V supply voltage allows for high efficiency. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. It is constructed with 20 pins. A method of mounting is used, which is Surface Mount. This device has a total of 20 pins. It is one of the components included in Microcontrollers. A device with a memory size of 8kB can store programs and data. It should be noted that 40mA represents the maximum supply current. Power is provided by a source of 5V. The system is highly efficient when working at a frequency of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. The number of timers and counters is 2. This part is an integral part of the PIC CPU family. An oscillator type Internal is required for it to work.
PIC18F1330T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F1330T-I/SS Applications
There are a lot of Microchip Technology PIC18F1330T-I/SS Microcontroller applications.
- Ipad
- Teletext terminals
- Light sensing & controlling devices
- Electrocardiogram (EKG)
- DCS control intelligent sensor
- Wastewater treatment
- Smartphone
- Home appliances
- Toys
- Hard drives
