PIC18F13K22-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F13K22 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 15.6mA |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F13K22-E/ML Overview
A space-saving advantage is that it is included in the 20-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tube. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~125°C TA. Memory type FLASH is used for program memory. It has a number of 17I/Os. A comparable component can be found by using the base part number PIC18F13K22. QUAD is the location of its terminals. It has 20 terminationals. The PIC? XLP? 18K series contains this electrical component. Because the supply voltage is 3.6V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 20 pins. A method of mounting is used, which is Surface Mount. A total of 20 pins are attached to it. The component is included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 8kB. There is a maximum current supply of 15.6mA. Power is provided by a source of 2/5V. The system is highly efficient when working at a frequency of 48MHz. It appears that there are 4 timers/counters in use. As part of the PIC CPU family, this component is included. The number of programmable inputs and outputs is 18. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.7V. Internal is the oscillator type it uses.
PIC18F13K22-E/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F13K22-E/ML Applications
There are a lot of Microchip Technology PIC18F13K22-E/ML Microcontroller applications.
- Process control devices
- Nintendo
- Industrial robot
- PDAs, game consoles
- Refrigerators
- Electronic jamming systems
- Microwave ovens
- Teletext terminals
- Smartphone
- Printers
