PIC18F13K22-E/P
| Parameters | |
|---|---|
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 15.6mA |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Length | 26.162mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.6V |
| Frequency | 48MHz |
| Base Part Number | PIC18F13K22 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
PIC18F13K22-E/P Overview
For the purpose of saving space, it is available in the 20-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. It is available in the Tube package. Device with PIC core processor issupported. The temperature should be kept at -40°C~125°C TA while working. There is FLASH program memory in it. It has a number of 17I/Os. To find equivalent components, use its PIC18F13K22 base part number. DUAL is the position of its terminals on the board. It has 20 terminationals. In the PIC? XLP? 18K series, this electrical component is found. This is due to the fact that the supply voltage is 3.6V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 20 pins. During the mounting process, the device is mounted based on the Through Hole method. There are 20 pins on it. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 8kB. The maximum supply current is 15.6mA. Power is provided by a source of 2/5V. It is highly efficient when it works at a frequency of 48MHz. There are currently 4 timers/counters set up on the system. This part is part of the PIC family of CPUs. There are 18 programmable I/Os. Normal operation requires a supply voltage (Vsup) above 2.7V. Using oscillator type Internal makes it work.
PIC18F13K22-E/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F13K22-E/P Applications
There are a lot of Microchip Technology PIC18F13K22-E/P Microcontroller applications.
- Volt meter
- Telephone sets
- Industrial robot
- Robots
- Air fryers
- Home appliances
- Current meter
- Vacuum cleaners
- Data acquisition and control
- Microwave ovens
