PIC18F13K22T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F13K22 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 15.6mA |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F13K22T-I/SS Overview
Due to its space-saving qualities, it is available in the 20-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. It comes in the package?of a Tape & Reel (TR). A core processor of PIC is present in the device. Work should be done at -40°C~85°C TA. Memory type FLASH is used for program memory. 17 I/Os are present on the device. It has a base part number of PIC18F13K22 that can be used to find other components that are comparable. At DUAL, it has its terminals. A 20 termination is contained within it. The PIC? XLP? 18K series contains this electrical component. The 3.6V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. It is constructed using 20 pins. Mounting is performed in accordance with Surface Mount. This device has a total of 20 pins. Microcontrollers contains this component. It is possible to store programs and data on the devices, as they have a memory size of 8kB. Supply current cannot exceed 15.6mA. A 2/5V power source powers it. At a frequency of 64MHz, it exhibits excellent efficiency. 4 timer/counters are present. The part is a part of the PIC CPU family. A chip with 18 programmable inputs/outputs is available. For normal operation, the supply voltage (Vsup) should be kept above 2.7V. There is an oscillator type Internal used in this circuit.
PIC18F13K22T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F13K22T-I/SS Applications
There are a lot of Microchip Technology PIC18F13K22T-I/SS Microcontroller applications.
- Hearing aids
- Calculators
- Switches
- Smart highways (navigation, traffic control, information monitoring and car service)
- Magnetic resonance imaging (MRI)
- Digital set-top boxes
- Toys
- Process control devices
- Paper shredders
- Scanners
