PIC18F13K50-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Base Part Number | PIC18F13K50 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 14 |
| Nominal Supply Current | 1mA |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| Density | 64 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 15 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 26.924mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F13K50-I/P Overview
Due to the benefits of saving space, it is available in the 20-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It is available in the Tube package. The device has a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 14 I/Os are present. A comparable component can be found by using the base part number PIC18F13K50. At DUAL, it has its terminals. There are a total of 20 terminations in it. The electrical component is part of the series PIC? XLP? 18K. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 20 pins are used. A method of mounting is used, which is Through Hole. Total number of pins is 20. In Microcontrollers, this component is included. The devices have a memory size of 8kB that can be used to store programs and data. Power is provided by a 2/5V source. The system is highly efficient when working at a frequency of 48MHz. 4 timers/counters are in use. It is part of the PIC CPU family. There are 15 programmable I/Os. A supply voltage (Vsup) above 2.7V is necessary for normal operation. Using a Internal oscillator type, it works well.
PIC18F13K50-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F13K50-I/P Applications
There are a lot of Microchip Technology PIC18F13K50-I/P Microcontroller applications.
- Smartphone
- Equipment control
- DCS control intelligent sensor
- Nintendo
- Electronic jamming systems
- Data acquisition and control
- Kindle
- Laminators
- Heart rate monitors
- Christmas lights
