PIC18F14K22-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.6V |
| Frequency | 64MHz |
| Base Part Number | PIC18F14K22 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 128 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 26.92mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F14K22-I/P Overview
For space savings, it is available in the 20-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. In the package Tube, it is included. PIC core processor is present on the device. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. A total of 17 I/Os are available on this device. It has a part number of PIC18F14K22 that can be used to locate similar components. DUAL is the position of its terminals on the board. In this case, there are 20 terminationals. It is a member of the PIC? XLP? 18K series of electrical components. The 3.6V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A number of 20 pins are used to construct it. The method of Through Hole is used to mount it. Total number of pins is 20. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 16kB. It is powered by a 2/5V?source. Using a frequency of 64MHz, it is very efficient. 4 timer/counters are present. CPU family PIC comprises the part. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.7V. The oscillator type Internal is used to operate the device.
PIC18F14K22-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F14K22-I/P Applications
There are a lot of Microchip Technology PIC18F14K22-I/P Microcontroller applications.
- Entertainment-radios, CD players, televisions
- DDC control
- Traditional industrial transformation
- Copiers
- Leakage current tester
- Current meter
- Blenders
- Entertainment products
- Kindle
- Sonography (Ultrasound imaging)
