PIC18F14K50-I/SO
| Parameters | |
|---|---|
| Number of Programmable I/O | 15 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F14K50 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 14 |
| Nominal Supply Current | 1mA |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| Density | 128 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
PIC18F14K50-I/SO Overview
Due to its space-saving qualities, it is available in the 20-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. It comes in a Tube package. It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. There are 14 I/Os on it. To find comparable components, use the PIC18F14K50 base part number. At DUAL, its terminals are located. Currently, it consists of 20 terminationals. It is a member of the PIC? XLP? 18K series of electrical components. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. For its construction, 20 pins are used. The method of Surface Mount is used to mount it. This device has a total of 20 pins. In Microcontrollers, this component is included. In the device, there is a memory capacity of 16kB which may be used to store programs and data. Powered by a 2/5V source. At a frequency of 48MHz, it exhibits excellent efficiency. In total, there are 4 timers and counters. This part is part of the PIC family of CPUs. The number 15 represents the number of programmable I/O ports on the board. In order to maintain normal operation, Vsup must be above 2.7V. An oscillator type Internal is required for it to work.
PIC18F14K50-I/SO Features
20-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F14K50-I/SO Applications
There are a lot of Microchip Technology PIC18F14K50-I/SO Microcontroller applications.
- Wastewater treatment
- Mice
- Teletext terminals
- Calculator
- Blenders
- Safety -airbags, automatic braking system (ABS)
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Hearing aids
- Automatic staplers
- Hand-held metering systems
