PIC18F2221-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2221 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 32 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2221-I/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tube. A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 25 I/Os are present on the device. A comparable component can be found by using the base part number PIC18F2221. The position of the device is DUAL at terminal. It consists of 28 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. As a result of the 5V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. The structure is constructed from 28 pins. It is mounted based on the method of Surface Mount. This device has a total of 28 pins. Microcontrollers contains this component. Memory size for the devices is 4kB, which can be used to store programs and data. It is powered by a 5V?source. Working at a frequency of 40MHz results in excellent efficiency. There are currently 4 timers/counters set up on the system. It belongs to the PIC CPU family. An oscillator of type Internal is used.
PIC18F2221-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2221-I/SS Applications
There are a lot of Microchip Technology PIC18F2221-I/SS Microcontroller applications.
- Industrial robot
- 3D printers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Petrochemical
- Auto-breaking system
- Printers
- DCS control intelligent sensor
- Speed meter
- Industrial instrumentation devices
- Microwave ovens
