PIC18F2320-E/SP
| Parameters | |
|---|---|
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F2320 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 4.06mm |
| Length | 34.67mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
PIC18F2320-E/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It comes in the package?of a Tube. There is a PIC as core processor in this device. Work should be done at -40°C~125°C TA. Its type of program memory is FLASH. A total of 25 I/Os are present. A comparable component can be found by using the base part number PIC18F2320. A DUAL position is assigned to its terminals. In this case, there are 28 terminationals. This electrical component is part of the PIC? 18F series. High efficiency is possible due to the 5V supply voltage. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. There are 28 pins used in the construction of this device. A method of mounting is used, which is Through Hole. There are a total of 28 pins on it. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 8kB that can be used to store programs and data. It should be noted that 10mA represents the maximum supply current. Power comes from a source of 5V. The system is highly efficient when working at a frequency of 25MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. 5 timer/counters are present. As part of the PIC CPU family, this component is included. There is an oscillator type Internal used in this circuit.
PIC18F2320-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2320-E/SP Applications
There are a lot of Microchip Technology PIC18F2320-E/SP Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Aerospace navigation systems
- Walkie talkies
- Playstation
- Tape drives
- Guidance-GPS
- Mobile computers
- Automatic control
- Entertainment-radios, CD players, televisions
- Fax machines
