PIC18F2321-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F2321 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 23mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F2321-E/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. In this case, it is mounted using the method of Through Hole. Tube is the package that contains it. There is a PIC as core processor in this device. It is important to keep the temperature at -40°C~125°C TA while working. Memory type FLASH is used for program memory. It has a number of 25I/Os. Based on its base part number of PIC18F2321, other similarly-sized components can be found. DUAL is the position of its terminals on the board. Currently, it consists of 28 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. The supply voltage of 5V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. It is constructed with 28 pins. As a result, it is mounted in accordance with Through Hole. 28 pins are on it in total. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 8kB. The maximum supply current is set at 23mA. Powered by a 5V source. At a frequency of 25MHz, it exhibits excellent efficiency. While deploying 5V, designers will be able to fully take advantage of its adaptability. There are 4 timers/counters. This part is part of the PIC family of CPUs. There is an oscillator type Internal used in this circuit.
PIC18F2321-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2321-E/SP Applications
There are a lot of Microchip Technology PIC18F2321-E/SP Microcontroller applications.
- Smartphone
- Walkie talkies
- Paper shredders
- Smartphones-calling, video calling, texting, email
- Industrial instrumentation devices
- Ipod
- Monitoring-temperature level, oil level, speed, distance, acceleration
- DDC control
- Radio
- Fire detection & safety devices
