PIC18F2321-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18F2321 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 64 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2321-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. In the package Tube, it is included. It is equipped with a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 25 I/Os on it, which makes it a very simple device. Based on the PIC18F2321 base part number, it can be compared with other components. The terminals of this device are located at DUAL. 28 terminationals are present. PIC? 18F is the series number of this electrical component. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 28 pins are used in its construction. Mounting is performed in accordance with Through Hole. There are 28 pins on it. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 8kB. There is 5V power source in this device. Working at a frequency of 40MHz results in excellent efficiency. In total, there are 4 timers and counters. The part is a part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC18F2321-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2321-I/SP Applications
There are a lot of Microchip Technology PIC18F2321-I/SP Microcontroller applications.
- Playstation
- Broadband technology, video and voice processing
- Instrument control
- Sonography (Ultrasound imaging)
- Microwave ovens
- Accu-check
- Guidance-GPS
- Vacuum cleaners
- Radio
- Printers
