PIC18F2331-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18F2331 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2331-E/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. Mounted using Through Hole. This item can be found in package Tube. It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~125°C TA. It has a type of program memory of FLASH. It has a number of 24I/Os. Based on the PIC18F2331 base part number, it can be compared with other components. At DUAL, its terminals are located. It has 28 terminationals. PIC? 18F is the series number of this electrical component. As a result of the 5V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is constructed from 28 pins. During the mounting process, the device is mounted based on the Through Hole method. On it, there are 28 pins. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 8kB which may be used to store programs and data. The maximum supply current is set at 15mA. A 5V source of power is being used to run it. The system is highly efficient when working at a frequency of 40MHz. Using 5V's adaptability as a supply voltage allows designers to maximize its use. 4 counters/timers are currently active. It is part of the PIC CPU family. Internal is the oscillator type it uses.
PIC18F2331-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2331-E/SP Applications
There are a lot of Microchip Technology PIC18F2331-E/SP Microcontroller applications.
- Virtual reality VR robots
- Embedded gateways
- Automatic staplers
- Fax machines
- Projectors
- Industrial instrumentation devices
- Wastewater treatment
- Binding machines
- Leakage current tester
- Smoke alarms
