PIC18F23K20-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 20 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Base Part Number | PIC18F23K20 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.5V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F23K20-E/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. Through Hole is used for mounting. It is available in the Tube package. The device runs in PIC core processor. Working at -40°C~125°C TA temperature is recommended. Its type of program memory is FLASH. There are 24 I/Os on it. It has a part number of PIC18F23K20 that can be used to locate similar components. The terminals of this device are located at DUAL. In this case, there are 28 terminationals. It is a member of the PIC? XLP? 18K series of electrical components. Because of the 3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed with 28 pins. Mounting is performed in accordance with Through Hole. 28 pins are on it in total. Microcontrollers contains this component. In the device, there is a memory capacity of 8kB which may be used to store programs and data. Supply current is maximum at 15mA. Power is provided by a 2/3.3V source. This device achieves excellent efficiency at frequencies of 48MHz. A total of 4 timers/counters have been set up. CPU family PIC comprises the part. The number of programmable inputs and outputs is 25. Moreover, it possesses the property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 20 MHZ. Normally, the supply voltage (Vsup) should remain above 2.7V. There is an oscillator type Internal used in this circuit.
PIC18F23K20-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F23K20-E/SP Applications
There are a lot of Microchip Technology PIC18F23K20-E/SP Microcontroller applications.
- Fire detection & safety devices
- Digital cameras
- DCS control intelligent sensor
- Refrigerators
- Current meter
- Industrial robot
- Fire alarms
- Answering machines
- Paper shredders
- Microwave ovens
