PIC18F2410-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2410 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of PWM Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2410-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. In the package Tube, it is included. It is equipped with a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. FLASH is its program memory type. The device has 25 I/Os. It has a base part number of PIC18F2410 that can be used to find other components that are comparable. The terminals of this device are set to DUAL. In this case, there are 28 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. Because of the 5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. There are 28 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. It is equipped with 28 pins in total. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. It is powered by a 5V?source. Working at a frequency of 40MHz results in excellent efficiency. 5V offers full adaptability and voltage supply when it is employed by designers. The number of timers and counters is 4. This part is part of the PIC family of CPUs. An oscillator type Internal is required for it to work.
PIC18F2410-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2410-I/SO Applications
There are a lot of Microchip Technology PIC18F2410-I/SO Microcontroller applications.
- Oscilloscopes
- Microwave ovens
- Safety -airbags, automatic braking system (ABS)
- Hand-held metering systems
- Washing machines
- Guidance-GPS
- Missile control
- DCS control intelligent sensor
- X-ray
- Industrial instrumentation devices
