PIC18F2450-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 48MHz |
| Base Part Number | PIC18F2450 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Interface | UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| Nominal Supply Current | 580μA |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 48 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Rate | 12 Mbps |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Inputs | 22 |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 128 kb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2450-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. This item can be found in package Tube. There is a PIC as core processor in this device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 23 I/Os on the board. A component with the same part number as PIC18F2450 can be compared to other similar components. The terminals of this device are set to DUAL. This circuit consists of 28 terminationals. In the PIC? 18F series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 28 pins. Based on the Through Hole method, it is mounted. This device has a total of 28 pins. In Microcontrollers, this component is included. In the device, there is a memory capacity of 16kB which may be used to store programs and data. There is 5V power source in this device. It performs extremely well at a frequency of 48MHz. There are 3 timers/counters. It is a member of the PIC family of CPUs. Normal operation requires a supply voltage (Vsup) that is higher than 4.2V. Using a Internal oscillator type, it works well.
PIC18F2450-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2450-I/SP Applications
There are a lot of Microchip Technology PIC18F2450-I/SP Microcontroller applications.
- DVD\DV\MP3 players
- Broadband technology, video and voice processing
- Projector
- Automatic staplers
- Toasters
- PDAs, game consoles
- Oil and gas
- Smoke alarms
- Computers and laptops-video calling, email, blogging
- Walkie talkies
