PIC18F2480T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2480 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
PIC18F2480T-I/SO Overview
To save space, it is included in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. In the package Tape & Reel (TR), it is included. PIC core processor is present on the device. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. A total of 25 I/Os are present. To find comparable components, use the PIC18F2480 base part number. The terminals of this device are located at DUAL. In this case, there are 28 terminationals. An electrical component such as this is included in the series PIC? 18F. The supply voltage of 4.5V allows for high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. According to Surface Mount, it is mounted. It has a total of 28 pins on it. Microcontrollers contains this component. The devices have a maximum memory size of 16kB that can be used to store programs and data. It is powered by a 5V?source. The system is highly efficient when working at a frequency of 40MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. There are currently 4 timers/counters set up on the system. The part is a part of the PIC CPU family. The oscillator type Internal is used to operate the device.
PIC18F2480T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2480T-I/SO Applications
There are a lot of Microchip Technology PIC18F2480T-I/SO Microcontroller applications.
- Traditional industrial transformation
- Teletext terminals
- Blenders
- Robots
- Aerospace navigation systems
- Industrial robot
- Blood pressure monitors
- Smart highways (navigation, traffic control, information monitoring and car service)
- Electrocardiogram (EKG)
- Data acquisition and control
