PIC18F248T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F248 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F248T-I/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. A package of Tape & Reel (TR) contains it. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 22 I/Os on it, which makes it a very simple device. Based on the PIC18F248 base part number, it can be compared with other components. This device has terminals at DUAL. As far as terminations are concerned, there are 28 terminations present. Part of the PIC? 18F series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 28 pins. A total of 28 pins are attached to it. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 16kB which may be used to store programs and data. A 5V source of power is being used to run it. The system is highly efficient when working at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. In total, there are 4 timers and counters. CPU family PIC comprises the part. There is an oscillator type External used in this circuit.
PIC18F248T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F248T-I/SO Applications
There are a lot of Microchip Technology PIC18F248T-I/SO Microcontroller applications.
- Process control devices
- Security systems
- DDC control
- Entertainment products
- Radio
- Traditional industrial transformation
- Broadband technology, video and voice processing
- Graphic terminals
- Binding machines
- Industrial instrumentation devices
