PIC18F24J10-I/ML
| Parameters | |
|---|---|
| Number of USB Channels | 1 |
| Height | 939.8μm |
| Length | 5.9944mm |
| Width | 5.9944mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F24J10 |
| Pin Count | 28 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
PIC18F24J10-I/ML Overview
It is available in the 28-VQFN Exposed Pad package for the benefit of saving space. Surface Mount is the way to mount it. Tube is the package that contains it. The device has a PIC core processor. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 21 I/Os on the board. It has a base part number of PIC18F24J10 that can be used to find other components that are comparable. The terminals of this device are located at QUAD. It consists of 28 terminationals. There are a number of electrical components in the PIC? 18J series, including this one. The 3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 28 pins used in the construction of this device. The method of Surface Mount is used to mount it. On it, there are 28 pins. Subcategory Microcontrollers includes this component. Using the devices' 16kB memory size, you can store programs and data. Working at a frequency of 40MHz results in excellent efficiency. 3 timers/counters are in use. There is an oscillator type Internal used in this circuit.
PIC18F24J10-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F24J10-I/ML Applications
There are a lot of Microchip Technology PIC18F24J10-I/ML Microcontroller applications.
- Playstation
- Robotic prosthetic limbs
- Guidance-GPS
- Computed Tomography (CT scan)
- Current meter
- X-ray
- Walkie talkies
- Process control devices
- DCS control intelligent sensor
- Medical instruments chromatographs
