PIC18F24J10-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F24J10 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Number of ADC Channels | 10 |
| Number of SPI Channels | 1 |
| Height | 1.8542mm |
| Length | 10.4902mm |
| Width | 5.588mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F24J10-I/SS Overview
It is available in the 28-SSOP (0.209, 5.30mm Width) package for the benefit of saving space. The way of Surface Mount is used to mount it. Package Tube contains it. A core processor of PIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 21 I/Os can be found on it. A comparable component can be found by using the base part number PIC18F24J10. The position of the device is DUAL at terminal. Currently, it consists of 28 terminationals. The PIC? 18J series includes this electrical component. The 3V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 28 pins are used to construct it. Mounting is performed in accordance with Surface Mount. It is equipped with 28 pins in total. Microcontrollers contains this component. The devices have a memory size of 16kB that can be used to store programs and data. Supply current cannot exceed 24mA. It is highly efficient when it works at a frequency of 40MHz. A total of 3 timers/counters have been set up. For normal operation, the supply voltage (Vsup) should be kept above 2.7V. It works with an oscillator type Internal.
PIC18F24J10-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F24J10-I/SS Applications
There are a lot of Microchip Technology PIC18F24J10-I/SS Microcontroller applications.
- Wastewater treatment
- Light sensing & controlling devices
- X-ray
- Digital set-top boxes
- Fax machines
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Petrochemical
- Equipment control
- Fire detection & safety devices
- Toasters
