PIC18F24J50T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F24J50 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Supply Current-Max | 22.7mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F24J50T-I/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. This is mounted using the Surface Mount method. This item can be found in package Tape & Reel (TR). It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 16 I/Os have been provided by the device. To find equivalent components, use its PIC18F24J50 base part number. At DUAL, it has its terminals. It consists of 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 18J. As a result of the 3.3V supply voltage, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. Based on the Surface Mount method, it is mounted. This device has a total of 28 pins. Subcategory Microcontrollers includes this component. Using the devices' 16kB memory size, you can store programs and data. There is a maximum current supply of 22.7mA. Using a frequency of 48MHz, it is very efficient. A total of 5 timers/counters are present. As part of the PIC CPU family, this component is included. There is an oscillator type Internal used in this circuit.
PIC18F24J50T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F24J50T-I/SS Applications
There are a lot of Microchip Technology PIC18F24J50T-I/SS Microcontroller applications.
- Auto-breaking system
- Sonography (Ultrasound imaging)
- Walkie talkies
- Fire alarms
- Entertainment-radios, CD players, televisions
- Automatic control
- Blood pressure monitors
- DCS control intelligent sensor
- Fire detection & safety devices
- Routers
