PIC18F2510-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2510 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 20 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2510-E/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Surface Mount is used for mounting. Package Tube contains it. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~125°C TA. Its type of program memory is FLASH. It has a number of 25I/Os. To find equivalent components, use its PIC18F2510 base part number. The terminals are positioned at DUAL. As far as terminations are concerned, there are 28 terminations present. In the PIC? 18F series, this electrical component is found. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. It is constructed using 28 pins. This mount is done in accordance with the method of Surface Mount. This device has a total of 28 pins. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 32kB. It is powered by a 5V?source. It performs extremely well at a frequency of 25MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 4 timers/counters have been set up. It is a member of the PIC family of CPUs. There is an oscillator type Internal used in this circuit.
PIC18F2510-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2510-E/SO Applications
There are a lot of Microchip Technology PIC18F2510-E/SO Microcontroller applications.
- Toasters
- Fax machines
- DDC control
- Keyboards
- Equipment control
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Ipad
- Missile control
- Christmas lights
- Computers and laptops-video calling, email, blogging
