PIC18F2510T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2510 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2510T-I/SO Overview
For the purpose of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. A package of Tape & Reel (TR) contains it. The device runs in PIC core processor. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. 25 I/Os can be found on it. Based on its base part number of PIC18F2510, other similarly-sized components can be found. At DUAL, its terminals are located. A 28 termination is contained within it. PIC? 18F is the series number of this electrical component. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 28 pins are used to construct it. It is mounted based on the method of Surface Mount. A total of 28 pins are attached to it. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 32kB. A 5V source is used for powering it. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are 4 timers/counters. This part is part of the PIC family of CPUs. Using an oscillator type Internal, it operates.
PIC18F2510T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2510T-I/SO Applications
There are a lot of Microchip Technology PIC18F2510T-I/SO Microcontroller applications.
- Mobile computers
- Fax machines
- Copiers
- Smart highways (navigation, traffic control, information monitoring and car service)
- Sonography (Ultrasound imaging)
- Dialysis machines (performs function of liver)
- Automatic control
- X-ray
- Leakage current tester
- Monitoring-temperature level, oil level, speed, distance, acceleration
