PIC18F252-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 4.5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F252 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | External |
| Number of I/O | 23 |
| Nominal Supply Current | 1.6mA |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 5 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 2.39mm |
| Length | 18.08mm |
| Width | 7.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F252-I/SO Overview
It is available in the 28-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. Tube is the package that contains it. Devices with PIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 23 I/Os on it, which makes it a very simple device. It has a part number of PIC18F252 that can be used to locate similar components. DUAL is the location of its terminals. In this case, there are 28 terminationals. This electrical component is part of the PIC? 18F series. It is possible to achieve high efficiency with a 4.5V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. It is constructed using 28 pins. It is equipped with 28 pins in total. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 32kB. A 5V source of power is being used to run it. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. In total, there are 4 timers and counters. It is a member of the PIC family of CPUs. It works with an oscillator type External.
PIC18F252-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F252-I/SO Applications
There are a lot of Microchip Technology PIC18F252-I/SO Microcontroller applications.
- Walkie talkies
- Smartphone
- Tape drives
- Fax machines
- Instrument control
- DDC control
- Dryers
- Radio
- Industrial robot
- Teletext terminals
