PIC18F2520-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18F2520 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| Nominal Supply Current | 1.1mA |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| Density | 256 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2520-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. It comes in the package?of a Tube. PIC core processor is present on the device. When working, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 25I/Os. In order to find similar components, it has a base part number of PIC18F2520. The position of the device is DUAL at terminal. As far as terminations are concerned, there are 28 terminations present. There are a number of electrical components in the PIC? 18F series, including this one. High efficiency is possible due to the 5V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. For its construction, 28 pins are used. This mount is done in accordance with the method of Through Hole. Total number of pins is 28. Microcontrollers contains this component. A device with a memory size of 32kB can store programs and data. A 5V source of power is being used to run it. At a frequency of 40MHz, it exhibits excellent efficiency. 4 timers/counters are in use. CPU family PIC comprises the part. An oscillator of type Internal is used.
PIC18F2520-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2520-I/SP Applications
There are a lot of Microchip Technology PIC18F2520-I/SP Microcontroller applications.
- Laminators
- Volt meter
- Washing machines
- Digital set-top boxes
- Copiers
- Auto-breaking system
- Virtual reality VR robots
- Robotic prosthetic limbs
- Mobile computers
- Electromechanical control
