PIC18F2520T-I/ML
| Parameters | |
|---|---|
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 20mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2520 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
PIC18F2520T-I/ML Overview
Due to its space-saving qualities, it is available in the 28-VQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in a Tape & Reel (TR) package. There is a PIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. FLASH is its program memory type. 25 I/Os have been provided by the device. It has a part number of PIC18F2520 that can be used to locate similar components. QUAD is the location of its terminals. It consists of 28 terminationals. The PIC? 18F series contains this electrical component. The supply voltage of 5V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 28 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. In total, it has 28 pins. This is a component included in Microcontrollers. In order to store data and programs, the devices have a memory size of 32kB. It should be noted that 20mA represents the maximum supply current. There is a source of power of 5V that powers this device. It is highly efficient when it works at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. The number of timers and counters is 4. It belongs to the PIC CPU family. Using oscillator type Internal makes it work.
PIC18F2520T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2520T-I/ML Applications
There are a lot of Microchip Technology PIC18F2520T-I/ML Microcontroller applications.
- Electromechanical control
- Broadband technology, video and voice processing
- Calculator
- Teletext terminals
- Blood pressure monitors
- Paper shredders
- Hard drives
- Scanners
- Leakage current tester
- Torpedo guidance
