PIC18F2520T-I/SO
| Parameters | |
|---|---|
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2520 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 20mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
PIC18F2520T-I/SO Overview
Due to the benefits of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Using Surface Mount, it is mounted. It comes in a Tape & Reel (TR) package. There is a PIC as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 25 I/Os on the board. In order to find similar components, it has a base part number of PIC18F2520. This device has terminals at DUAL. It consists of 28 terminationals. An electrical component such as this is included in the series PIC? 18F. As a result of the 5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 28 pins are required to construct this device. According to Surface Mount, it is mounted. On it, there are 28 pins. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 32kB. It should be noted that 20mA represents the maximum supply current. Power comes from a source of 5V. Using a frequency of 40MHz, it is very efficient. Using 5V's adaptability as a supply voltage allows designers to maximize its use. There are 4 timers/counters. As part of the PIC CPU family, this component is included. The oscillator type Internal is used to operate the device.
PIC18F2520T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2520T-I/SO Applications
There are a lot of Microchip Technology PIC18F2520T-I/SO Microcontroller applications.
- Electrocardiogram (EKG)
- Projectors
- Routers
- DDC control
- Fire detection & safety devices
- Microwave ovens
- Projector
- Blenders
- Automatic staplers
- Washing machines
