PIC18F2525-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F2525 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 35mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2525-E/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. Using Through Hole, it is mounted. It is available in the Tube package. PIC core processor is present on the device. Work should be performed at a temperature of -40°C~125°C TA. FLASH is its program memory type. A total of 25 I/Os are present. A comparable component can be found by using the base part number PIC18F2525. DUAL is the location of its terminals. This circuit consists of 28 terminationals. The electrical component is part of the series PIC? 18F. By using a 5V voltage supply, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A number of 28 pins are used to construct it. This mount is done in accordance with the method of Through Hole. 28 pins are on it in total. It is one of the components included in Microcontrollers. The devices have a memory size of 48kB that can be used to store programs and data. It should be noted that 35mA represents the maximum supply current. Power is provided by a source of 5V. Working at a frequency of 25MHz results in excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. A total of 4 timers/counters are present. It belongs to the PIC CPU family. It works with an oscillator type Internal.
PIC18F2525-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2525-E/SP Applications
There are a lot of Microchip Technology PIC18F2525-E/SP Microcontroller applications.
- Tape drives
- Process control devices
- Playstation
- Removable disks
- Hard drives
- Paper shredders
- Process control devices
- Binding machines
- Washing machines
- Firewalls
