PIC18F2580-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2580 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2580-E/ML Overview
Due to the benefits of saving space, it is available in the 28-VQFN Exposed Pad package. Using Surface Mount, it is mounted. A package of Tube contains it. There is a PIC as core processor in this device. Work should be performed at a temperature of -40°C~125°C TA. In terms of its program memory type, it is FLASH. There are 25 I/Os on the board. Based on the PIC18F2580 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. It consists of 28 terminationals. The electrical component is part of the series PIC? 18F. The 4.5V supply voltage enables high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. 28 pins are used to construct it. The method of Surface Mount is used to mount it. 28 pins are on it in total. Microcontrollers contains this component. The devices have a maximum memory size of 32kB that can be used to store programs and data. A 5V source of power is being used to run it. This device works well at 25MHz frequency when it is operating at a high rate of efficiency. There are currently 4 timers/counters set up on the system. This part is part of the PIC family of CPUs. Using a Internal oscillator type, it works well.
PIC18F2580-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2580-E/ML Applications
There are a lot of Microchip Technology PIC18F2580-E/ML Microcontroller applications.
- Electromechanical control
- Fax machines
- Calculator
- Smart highways (navigation, traffic control, information monitoring and car service)
- Paper shredders
- Equipment control
- Dryers
- Set-top boxes
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Walkie talkies
