PIC18F2585-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F2585 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2585-E/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. Tube is the package that contains it. A core processor of PIC is present in the device. Work should be done at -40°C~125°C TA. The type of memory it uses is FLASH. It has a number of 25I/Os. Other components that are comparable to it have the base part number PIC18F2585. At DUAL, it has its terminals. Currently, it consists of 28 terminationals. The PIC? 18F series contains this electrical component. Using the 5V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed with 28 pins. During the mounting process, the device is mounted based on the Through Hole method. It is equipped with 28 pins in total. This is a component included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 48kB. Powered by a 5V source. This device works well at 25MHz frequency when it is operating at a high rate of efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. There are currently 4 timers/counters set up on the system. This part is part of the PIC family of CPUs. The oscillator type Internal is used to operate the device.
PIC18F2585-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2585-E/SP Applications
There are a lot of Microchip Technology PIC18F2585-E/SP Microcontroller applications.
- Oscilloscopes
- Digital cameras
- Scanners
- Pacemakers (used to control abnormal heart rhythm)
- Graphic terminals
- Projector
- Smart highways (navigation, traffic control, information monitoring and car service)
- Mice
- Traditional industrial transformation
- Binding machines
