PIC18F2585T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2585 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2585T-I/SO Overview
To save space, it is included in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. It comes in a Tape & Reel (TR) package. With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. FLASH is its program memory type. The device has 25 I/Os. To find equivalent components, use its PIC18F2585 base part number. The terminals of this device are located at DUAL. This circuit consists of 28 terminationals. The PIC? 18F series contains this electrical component. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. During the mounting process, the device is mounted based on the Surface Mount method. A total of 28 pins are attached to it. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 48kB. There is a source of power of 5V that powers this device. It performs extremely well at a frequency of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. 4 timers/counters are in use. This part is an integral part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC18F2585T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2585T-I/SO Applications
There are a lot of Microchip Technology PIC18F2585T-I/SO Microcontroller applications.
- Dryers
- Smoke alarms
- Information appliances (networking of household appliances)
- Digital set-top boxes
- Robotic prosthetic limbs
- Digital TVs
- Broadband technology, video and voice processing
- Auto-breaking system
- Security systems
- Food and beverage
